Osborn ATB CNC Machine

ATB®

ATB® is the abbreviation for Advanced Technology Brush System and forms our product range of brushes for automated deburring directly after the machining process.

ATB® - High-tech brushes for automated deburring.

ATB® brushes are precision tools that are largely responsible for the quality of the end products. They can be matched component-oriented to almost any material to be processed.

Our ATB® brushes are available with a wide range of abrasive bristles and wire trim in different grit sizes and filament/wire diameters.

Loading...
Osborn ATB CNC Machine

ATB® brushes are designed for direct adaptation to tool holders, which means that they can be used in machining centres, CNC lathes & milling machines, robot cells, etc. 

The brushes are used downstream of the machining process and can be used with cooling lubricants, emulsions or water without any problems.
This means that the machined workpieces can be deburred and finished directly, reliably and reproducibly on the machine without reclamping.

Before/after comparison.

Loading...

Before machining - clear burr formation on the edge. Milling grooves on the surface.

Loading...

After machining - burrs were reliably removed and the edges rounded. The surface has an even, brushed look.

Advantages and
Application examples.

ATB® brushes have a 4 x higher fill density than the disc brushes produced in the conventional process (punched). As a result, the service life of the brushes is increased many times over, with higher throughput speeds and better and more efficient deburring results.

  • Minimal process costs
  • Firmly encapsulated abrasive bristles
  • Extremely dense fill surface
  • Enormously long tool life
  • High dimensional stability and concentricity
  • Use of cooling lubricant, emulsions and water possible
  • Plane fill surface
  • Numerous, different fill materials e.g. abrasive bristles, wire materials, mixed fill material
  • No reclamping of the workpiece after machining

Due to shorter machining times and very uniform edge rounding, our ATB® brushes are particularly suitable for deburring:

  • Milled and turned parts
  • Ground parts
  • Sintered parts
  • Stamped, nippled and pressed parts
  • Pneumatic and hydraulic parts
  • Engine components, e.g. cylinder head, cylinder block etc.
  • Die-cast parts
  • Valve plates
  • Flat ground parts
  • Toothed components
  • Contact and sealing surfaces
  • Finishing

Osborn
ATB® portfolio.

Tool holders & adaptability.

ATB® brushes are compatible with the following tool holders for direct adaptability for use in automated machining stations:

ATB®-Disc brushes

  • Shell mill adaptors DIN 69882-3 / Universal arbors DIN 69882-2
  • Planet head holder
  • With Osborn clamping sets, other holders are possible such as Weldon holders or similar.
  • Toolholders with HSK-taper shank DIN 69893
  • ISO Taper-toolholders SK nach DIN 69871
  • Holders for straight shank tools DIN 69882-4 (Weldon DIN 1835 B) etc.

ATB®-Wheel brushes

  • Shell mill adaptors DIN 69882-3 / Universal arbors DIN 69882-2
  • Through hole with and without keyway
  • With Osborn clamping sets (shank holders)
  • Toolholders with HSK-taper shank DIN 69893
  • ISO Taper-toolholders SK nach DIN 69871

ATB®-End brushes

  • shank holders
  • Toolholders with HSK-taper shank DIN 69893
  • ISO Taper-toolholders SK nach DIN 69871
  • Holders for straight shank tools DIN 69882-4 (Weldon DIN 1835 B) etc.

 

 

Trim patterns & designs.

In order to achieve the best possible deburring and finishing results, different fill patterns and designs are required. Depending on the available product families of ATB® brushes, we offer the following fill types, among others:

Loading...

ATB® disc brush

  • full fill (max. fill density)
  • partial fill (segmented)
  • turboshape
  • ring fill
  • tapered/angled fill (under angle)
  • spotted version

ATB® wheel brush

  • full fill (max. fill density)
  • partial fill (segmented)

ATB® End Brush

  • full fill (max. fill density)

Determined by the material to be processed and the workpiece geometry, ATB® brushes can be equipped with various fill materials, from wire fill to abrasive bristles to mixed fill.

Technical feasibility & standard configurations.

In order to make the best possible use of the advantages of our ATB® product line, it is often necessary to exchange ideas with our product professionals. Often, application-specific brushing tools are worked out for the customer, which is developed taking into account the entire machining process.

We offer the following standard configurations (dimensions) for the three ATB® product families:

Loading...

ATB® Disc brush

  • Outer-Ø D: Ø40 to Ø250 mm
  • Trim height T: 35 mm
  • Body height KH: 13 mm
Loading...

ATB® Wheel Brush

  • Outer-Ø D: Ø100 to Ø355 mm
  • Working width AB: 6 to 36 mm
  • Body width KB: 10 to 40 mm
  • Mounting hole ØB: 16 to 134 mm with and without keyways
Loading...

ATB® End Brush

  • Outer-Ø D: Ø16 to Ø40 mm
  • Trim height T: 25 to 30 mm
  • Shaft diameter: 6-8 mm
  • Total length SL: 85 to 176 mm

ATB®
Products.

Filter Products
Loading...
Product image for Accessoires – Clamping fixtures for ATB® disc brushes with shank and clamping surface EUIBAC001

Clamping fixtures for ATB® disc brushes with shank and clamping surface

Evolution

Clamping fixtures with shank-Ø 12 mm and clamping surface DIN 6535-HB. Compatible with ATB® disc brushes including a hexagonal mounting bore.

Loading...
Product image for Accessoires – Tool holders EUIBAC002

Tool holders

Evolution

HSK – A63, to DIN 69893

Loading...
Product image for Industrial Disc Brushes – ATB® disc brushes with maximum fill density, for tool holders EUIBDB002

ATB® disc brushes with maximum fill density, for tool holders

Evolution

For deburring sealing and contact surfaces. The application should take place on stationary machines. Use with cooling lubricant, water, oil is recommended.

Loading...
Product image for Industrial Disc Brushes – ATB® disc brushes with maximum fill density, Turbo-line EUIBDB004

ATB® disc brushes with maximum fill density, Turbo-line

Evolution

Brushes for use on continuous deburring systems with planetary heads.

Loading...
Product image for Industrial Disc Brushes – ATB® disc brushes with maximum fill density, compatible with clamping fixture EUIBDB001

ATB® disc brushes with maximum fill density, compatible with clamping fixture

Evolution

Can be used for deburring components made of the most diverse of materials, such as steel, aluminium and cast iron.

Loading...
Product image for Industrial Wheel Brushes – ATB® wheel brush with full trim, shank adaption EUIBWB002

ATB® wheel brush with full trim, shank adaption

Evolution

ATB® wheel brush with shank for direct adaption on several tool holders. Please ask our application technicians for open requests and general questions about the ATB® products.

Loading...
Product image for Industrial Disc Brushes – ATB® disc brushes with maximum fill density, for shell mill mount EUIBDB003

ATB® disc brushes with maximum fill density, for shell mill mount

Evolution

For direct mounting on shell mill holders without need of further clamping set / system.

Loading...
Product image for Industrial End Brushes – ATB® end brush, shank adaption EUIBEB001

ATB® end brush, shank adaption

Evolution

ATB® end brush with shank for direct adaption on several tool holders. Please ask our application technicians for open requests and general questions about the ATB® products.

Loading...
Product image for Industrial Wheel Brushes – ATB® wheel brush with full trim, Cutter head holders/combined cutter arbor EUIBWB001

ATB® wheel brush with full trim, Cutter head holders/combined cutter arbor

Evolution

ATB® wheel brush with longitudinal groove for direct clamping on tool holders (e.g. HSK, SK, BT) as cutter head holders and combi milling arbor holders. Please ask our application technicians for open requests and general questions about the ATB® products.

Loading...
Copyright 2022 Osborn GmbH. All rights reserved.
Loading...