Grinding wood

Whether sanding, fine sanding or intermediate lacquer sanding. Whether a simple, flat surface or a complex, uneven surface - Osborn helps with the sanding of wood.

Fine and coarse sanding

Rough sanding:

The first coarse sanding is intended to sand down and remove larger wood splinters or fibers. When restoring wooden workpieces, paint and varnish residues can also be removed. Sanding belts with grit sizes between 40 and 60 are recommended for coarse sanding. Work in the direction of the grain. To reduce the thermal effect on the wood you should work with low and constant contact pressure. This ensures constant material removal and prevents the unintentional creation of hollows and unevenness. It also helps to work as long as possible, as frequently setting the tool down can lead to edges and steps in the surface.

 

Fine sanding:

The final touch for the ideal wood surface. The preparatory work to remove residues and coarse unevenness has been completed so that finer grits can be used now. For fine sanding, we recommend using a sanding belt with grit 120 and finer. The last small imperfections are getting removed. Fine wood dust will settle on the wooden surface. It should be removed regulary from the surface, otherwise there is a risk of sanding the deposits back into the wood and creating new unevenness. Only work with the wood grain.

Loading...

Flap sander with abrasive grain for high-speed machines.

Intermediate lacquer sanding - optimal preparation for the final lacquer application

For visible surfaces of wooden workpieces two or more coats are required. The intermediate lacquer sanding is applied between the coats and builds the ideal basis for the subsequent, final lacquer application. This sanding process can be used for sealers, primers or primer coats.

The primary aim of intermediate sanding is to prepare the surface to be painted for the final coat as well as possible. With Osborn sanding tools you can achieve a homogeneous, smoothed surface. This makes painting work much easier, as the sanding ensures improved adhesion of the paint. Subsequent work, such as polishing or final sanding, is also simplified and shortened.

Products for
Grinding wood.

Filter Products
Loading...
Product image for Flap Rolls and Wheels – Flap wheels EUGMFR004

Flap wheels

Superior

Coated abrasive flap wheels with aluminium oxide, industrial quality, for use on high-speed machines.

Loading...
Product image for Flap Rolls and Wheels – Coated abrasive and non-woven combi rollers for burnishing machines EUGMFR001

Coated abrasive and non-woven combi rollers for burnishing machines

Superior

Abrasive flap rollers with non-woven and abrasive cloth combined, industrial quality, for the use on burnishing machines.

Loading...
Product image for Flap Rolls and Wheels – Coated abrasive and non-woven combi flap wheels EUGMFR005

Coated abrasive and non-woven combi flap wheels

Superior

Combi flap wheel with coated abrasives and non-woven material, industrial quality, for use on high-speed machines.

Loading...
Product image for Flap Rolls and Wheels – Coated abrasive flap rollers for burnishing machines EUGMFR003

Coated abrasive flap rollers for burnishing machines

Superior

Coated abrasive flap rollers, industrial quality, for the use on burnishing machines.

Loading...
Copyright 2022 Osborn GmbH. All rights reserved.
Loading...