Osborn Logo
Wishlist

Bore Processing

When it comes to deburring engine parts, housings, and pneumatic and hydraulic parts that have many internal bores, cross bores, threads, O-ring recesses, etc., there are different tools for processing depending on the application.

About bore processing.

When it comes to deburring engine parts, housings, pneumatic and hydraulic parts that have many internal bores, cross bores, threads, O-ring recesses, etc., there are different tools depending on the application. 
But which ones are really suitable? One thing is clear: a perfect tooling and machining strategy is always tailored to the respective application.

Content

Deburring bores

Deburring bores is an important and difficult step in the machining process. In vehicle construction (e.g., engine and hydraulic parts), poor deburring may lead to severe damage or failure, thus posing high safety risks.

Bore cleaning

Cleaning bores is primarily a matter of removing slightly adhering burr residues by mechanical means.

Bore derust & descale

Scale and rust are corrosion products that must be removed from bores.

Breaking edges in a bore

Here, bores are deburred and a minimal edge rounding is introduced at the same time. In machining processes, an edge break should be done before further processing of the workpiece, because sharp angles are predestined for the formation of burrs.

Osborn ATB Novoflex Honing Tools Honing Deburring Flexible

Hole honing

Honing is a machining process. A self-centering honing tool such as our Novoflex® honing tools is used for this.

Bore finish

The finishing process involves creating a surface with a defined roughness depth.

© 2022 Osborn. All Rights Reserved